Precision Digital PD562 - Manual (Page 7)

1.1 SPECIFICATIONS
General
DISPLAY Dual 4 digits, red LED, -1999 to 9999
DIN Sizes PV Display SP Display Weight
mm (inch) mm (inch) g (oz)
1/8 19.8 (0.78) 11.5 (0.45) 306 (10.6)
1/4 20.5 (0.81) 11.0 (0.43) 389 (13.7)
FRONT PANEL 1/8 DIN: IP65; 1/4 DIN: IP55
SAMPLING TIME 250 ms
OVERRANGE Over range PV reads ovR, under range PV reads -ovR
PROGRAMMING Four front panel buttons, Modbus
METHODS
NOISE FILTER Programmable from 1 to 120
CALIBRATION All ranges are calibrated at the factory
MAX/MIN Max/min readings reached by the process are stored until
DISPLAY reset by the user or until power to the meter is turned off.
PASSWORD Programmable password restricts modification of
programmed settings
POWER 100-240 VAC, 50/60 HZ, 10 W atts
FUSE Required fuse: UL Recognized, 1 A, 250 V, slow blow
ISOLATION 2300 V input-to-output-to-power line;
4 kV relay output-to-input/output/power line
ENVIRONMENTAL Operating temperature range: 10ºC to 50ºC (50ºF to 110ºF)
Relative humidity: 20 to 90% non-condensing
MOUNTING 1/8 or 1/4 DIN size cutout required
Two panel mounting bracket assemblies provided
WARRA NTY Three years parts and labor
EXTENDED Extended parts and labor warranties are available at time of
WARRA NTY ordering
Retransmitting Output
OUTPUT RANGE Retransmitting: 4 to 20 mA (600
Ω maximum)
SCALING RANGE Any display range (see range for the input selected)
ACCURACY +0.1% of full scale
Except where noted all specifications apply to operation at 23ºC.
PD560 Series Nova Digital Process and Temperature Meter Instruction Manual
7