Qlima A25 - Manual (Page 41)

4
41
that may cause a fire hazard or in environments
where explosions may occur.
• Always switch the device off and remove the
plug from the socket before cleaning it.
• The surface must be stable and level.
• The installation must be completely in accord-
ance with local regulations, ordinances and
standards.
• The device is suitable exclusively for use in dry
places, indoors.
• Check the mains voltage. This device is suita-
ble exclusively for earthed sockets – connection
voltage 220-240 Volt/ 50 Hz.
Before connecting the unit, check the following:
• The voltage supply must correspond with the
mains voltage stated on the rating label.
• The socket and power supply must be suitable for
the current stated on the rating label.
• The plug on the cable of the device must fit into
the wall socket.
• The device must be placed on a flat and stable
surface.
The electricity supply to the device must be checked
by a recognised professional if you have any doubts
regarding the compatibility.
• This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safe-
ty.
• This device is manufactured according to CE
safety standards. Nevertheless, you must take
41