RISCO Group GT480 User Manual
Page 7
P
P
P
P
a
a
a
a
g
g
g
g
e
e
e
e
5
5
5
5
Part Setting the System (using Part 2 or 3).
Two other Part Sets may be available for your system. Part 2 is a
second set of zones that may be omitted and Part 3 will combine Part
1 and Part 2. To use Part 2 or 3.
1)
Enter a valid User Code followed by 2 or 3.
2)
Retire to an unprotected area.
Note:
To abort the exit enter a valid User Code.
3)
The exit tone may or may not be heard depending on the
system settings programmed by the installation company.
4)
Exit the premises or retire to an unprotected part of the
system. At the end of the exit time, either the exit sounder
will stop (if the exit tone has been audible) or a single beep
will be emitted (if the exit tone has been silent).
5)
The system is now Part Set. You are free to move around the
zones that have been removed by the Part Set but other
zones on the system are active.
GardTec 480 User PR5831_11 5IN480UM_B A6 booklet.qxd 19/07/2007 17:18 Page 5