RIGOL DP832 - Manual (Page 119)

Chapter 2 Front Panel Operations RIGOL
DP800 User’s Guide 2-69
Options
Press Utility  Option to enter the option interface and you can view the current
option installation information. To install the desired option, please order the
corresponding option according to the order number provided in "Appendix A:
Accessories and Options" in this manual.
To install an option, the option license is required (each instrument corresponds to a
license). The option license is a 28-byte string consisting of uppercase English letters
and numbers. When the desired option is purchased, you can obtain the
corresponding key (the key is used to acquire the option license). You can install the
option following the steps below.
1. Acquire the option license
1) Log in the RIGOL official website ( www.rigol.com ). Click Customer
Center  License Generate to enter the license generation interface.
2) Input the correct key, serial number (press Utility  Sys Info to acquire
the serial number of the instrument) and indentifying code in the license
generation interface and click Generate to acquire the option license.
2. Install the option
DP800 series power supply supports the following three option installation
modes.
1) Front panel operation
 Press Utility  Option  Install to enter the filename input
interface and the input method is fixed at "EN".
 Input the correct option license and click OK (for the inputting method,
refer to "Save").
Note: The hyphens are not included in the option license.
2) Read the option installation file in the USB storage device
The content and format requirements of the option installation file are as
follows.
 The filename suffix must be ".lic".
 The file content requirements:
Filename Suffix
Blank Line
Instrument Serial Number
Option License