Rose Electronics UltraView Remote 2 - Manual (Page 11)

ULTRAVIEW REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 7
Connecting the Computers / Servers
Connect each computer to the UltraView Remote 2 using the appropriate CPU adapter cable designed to interface to
the type of computer being connected (PS/2, Unix, SUN, DEC, Apple, etc). Connect the DB25M end of the CPU
adapter cable to the desired DB25F CPU port on the rear panel of the unit. Connect the other end of the cable to the
corresponding ports on the computer (keyboard, monitor, and mouse). Refer to Figure 3.
Figure 3. Connecting Computers
Connecting to the network
Connect a network cable from the RJ45 connector on the rear panel of the UltraView Remote 2 and to your network
(See Figure 4)
Figure 4. Connecting to the Network
Network connection
Remote
computer
connections CPU adapter
cable(s)