Rose Electronics UltraView Remote 2 User Manual
Page 17
ULTRAVIEW REMOTE 2 INSTALLATION AND OPERATIONS MANUAL
13
Connecting Remotely
With the Unit and the Network configured properly, start a web browser like IE or Netscape from any workstation
connected to the same network your UltraView Remote 2 is connected to. Type in the UltraView Remote 2’s
assigned IP address (Example (http://168.192.0.41) in the URL field. The UltraView Remote 2 will respond with the
below screen. There may be initial login and connect screens displayed.
(NOTE: See Appendix F for additional VNC Viewer options)
Click on the “Connect using built-in VNC viewer” option and the UltraView Remote 2 will install a temporary Java
applet on the requesting computer and then display the connected computer’s video in the browser’s VNC viewer
window. In the upper right corner of the window is a “Configure” tab. Click on this tab to display the remote
configuration option menu as shown below.
Remote Configuration
Connect to the UltraView Remote 2 unit from any network workstation. When connected, click on the “Configure” tab
in the upper right corner of the display. The below configuration menu will display.
Figure 11. Remote Configuration Menu
Clicking on the Configure tab
Displays the configuration window