TA Triumph-Adler CX 8048 - Manual (Page 27)

4. Insert each Flange (4) into both ends of the roll media core to be installed.
4
6
6: (back)
NOTE
(1) Fully insert Flange into the roll media core so that the inside rim of Flange evenly touches
the side face of the roll media.
Gap
Inside Rim
Inside Rim
Correct: Fully inserted Wrong: not touching roll side
(2) Flange has Stoppers (6) with sharp edge.
Be sure not to touch them.
Chapter 2 Basic Operation 2-6