TA Triumph-Adler CX 8048 - Manual (Page 53)

4. 1 Cleaning
4. 1. 1 Scanner Unit
Clean each Scan Glass, Feeding Rollers and Guide Plates once per a week, as the scan/copy
image may become defective if these parts are dirty.
1. Turn off CX 8048.
2. Open the Scanner Unit pulling up the Levers (1).
1
3. Wipe each Scan Glass (2), Feeding Rollers (3) and the inside surface with a soft cloth.
Use equal volume mixture of water and a neutral detergent.
3
2
NOTE
Do not use organic solvent, glass cleaner and anti-static spray for the cleaning.
Chapter 4 Maintenance 4-2
2
3