TA Triumph-Adler 2256 - Manual (Page 16)

1-2
Setting up the Machine > Part Names and Functions
Part Names and Functions
Machine
This chapter explains the names of parts when the machine is used as a fax machine. For the parts required when
functions other than FAX are used, refer to the machine’s Operation Guide.
1 Operation panel Perform the fax operation with this panel.
2 Power switch Set this switch to the ON side when performing the fax or copier operation.
3 TEL connector When using a commercially available telephone set, connect the modular cord to this
connector.
4 LINE connector Connect the modular cord for the telephone line to this connector.
IMPORTANT
You cannot automatically receive a fax when the power switch is turned off.
3
4
1
2