TA Triumph-Adler DC 2020 User Manual
TA Triumph-Adler Copiers
Advertising
Table of contents
Document Outline
- Introduction
- INSTALLATION PRECAUTIONS
- PRECAUTIONS FOR USE
- Section 1
- Basic Use of this Fax
- Preparations
- Features and Functions of this Fax
- (1) Switching from the Copy Operation Mode to the Fax Operation Mode
- (2) Initial Mode
- (3) When You Press the Reset Key…
- (4) Auto Clear Function
- (5) Document Number
- (6) Auto Shut-Off Function
- (7) Dual Access Function
- (8) Batch Transmission Function
- (9) Rotate & Transmit Function
- (10) F-Code Based Communication
- (11) Memory Reception Function
- (12) Rotate Received Documents
- (13) Imaging Memory Back-Up Function
- Sending Documents
- Receiving Documents (Automatic Fax Reception)
- Canceling a Communication
- Entering Characters
- One-Touch Keys
- Abbreviated Numbers
- Directory
- Redialing Functions
- Section 2
- Section 3
- Section 4
- Other Features of this Fax
- TAD Reception
- D.R.D. Reception (Inch version only)
- Remote Switching
- Polling Communication
- F-Code Based Communication
- (1) What is the purpose of an F-Code Box?
- (2) Registering F-Code Based Confidential Boxes
- (3) Modifying and Deleting F-Code Based Confidential Boxes
- (4) F-Code Based Confidential Communication
- (5) Printing Out an F-Code Based Confidential Box List
- (6) F-Code Based Bulletin Board Communication
- (7) Registering F-Code Based Relay Boxes
- (8) Modifying and Deleting F-Code Based Relay Boxes
- (9) F-Code Based Relay Broadcast Transmission
- (10) Printing Out an F-Code Based Relay Box List
- Fax Forwarding
- Group Dial Keys
- Program Keys
- Password Check Communication
- Encrypted Communication
- (1) Registering Encryption Keys
- (2) Deleting Encryption Keys
- (3) Registering Encryption Boxes
- (4) Modifying and Deleting Encryption Boxes
- (5) Required Operation (Transmitting party)
- (6) Required Operation (Receiving party)
- (7) Printing Out Documents from an Encryption Box
- (8) Printing Out an Encryption Key List
- (9) Printing Out an Encryption Box List
- Restricted Access
- (1) Preparations Before Use
- (2) Message Display in the Initial Mode (Restricted Access is turned ON)
- (3) Entering Your Access Code
- (5) Registering Access Codes
- (6) Changing a Department Name
- (7) Deleting Access Codes
- (8) Turning Restricted Access ON/OFF
- (9) Printing Out a Restricted Access Report
- (10) Printing Out a Department List
- Section 5
- Section 6
- Various Settings and Registration in this Fax
- Turning Report Print Out ON/OFF
- Turning the Bulletin Board ON/OFF
- Setting the Number of Rings (Auto Fax Reception)
- Setting the Number of Rings (TAD Reception)
- Setting the Number of Rings (FAX/TEL Switching)[Inch version only]
- Turning Dial Confirmation ON/OFF
- Making Volume Settings
- Setting the Document Size for Scanning from the Document Feeder
- Selecting the Reception Mode
- Turning Reception Date & Time Print Out ON/OFF
- Selecting the Paper Feed Selection Mode
- Turning 2 in 1 Reception ON/OFF
- Turning Remote Diagnosis ON/OFF
- Setting the Default Transmission Mode
- Registering the Remote Test ID
- Registering the Management Password
- Various Settings and Registration in this Fax
- Section 7
- Section 8