TA Triumph-Adler DC 2020 - Manual (Page 31)

1-23
Section 1 Basic Use of this Fax
<Notes>
• The Fine and Super Fine resolutions reproduce clearer images in
comparison to transmission with the Normal resolution, but
transmission time is longer.
• The Half Tone [PHOTO MODE] resolution reproduces grays
clearly, but transmission time is longer than with the Normal or Fine
resolutions.
• To transmit with the Ultra Fine resolution, 8 MB of additional
memory must be installed. If the additional memory is not installed,
documents will be transmitted with the Super Fine resolution even if
Ultra Fine is selected.
• To transmit with the Super Fine or Ultra Fine resolutions, the
receiving fax must have the corresponding resolution capabilities in
order to benefit from their features. If the receiving fax does not
have the corresponding capability, transmission will be
accomplished with the Fine resolution.
Selecting the resolution
It is possible to select a resolution from among the 5 available
settings.
* Ordinarily, all of the resolution indicators are out; and the
Normal resolution is thus selected. If you want to use the
Normal resolution, there is no need to change this setting.
* If you want to change the resolution, press the resolution
select key until the resolution indicator that corresponds to
the desired resolution is lit.
● Resolutions
• Normal: For transmitting documents with standard size
characters
• Fine: For transmitting documents with relatively small
characters or thin lines
• Super Fine: For transmitting documents with detailed lines
and characters
• Ultra Fine: For transmitting the clearest reproduction of
documents with detailed lines and characters
• Half Tone [PHOTO MODE]: For transmitting the clearest
reproduction of documents containing both photographs as
well as text
4
5
Selecting the contrast
Press the contrast select key to select, from among the 3
available settings, the degree of contrast at which the
documents will be scanned.
* Ordinarily, the middle indicator (No. “3”) will be lit. If you want
the darkest possible contrast, make sure the number “5”
indicator is lit. If you want the lightest possible contrast, make
sure the number “1” indicator is lit.
(Inch) (Metric)
(Inch) (Metric)
(Inch) (Metric)