Responding to messages, Responding to messages -23 – TA Triumph-Adler 3555i User Manual
Page 461
10-23
Troubleshooting > Troubleshooting
Responding to Messages
If the touch panel or the computer displays any of these messages, follow the corresponding procedure.
A
B
Message
Checkpoints
Corrective Actions
Reference
Page
Acceptable fold count
exceeded.
Is the acceptable number of sheets
exceeded?
Press [Continue] to print using Fold
per acceptable number of sheets.
Press [Cancel] to cancel the job.
Acceptable staple count
exceeded.
*
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Is the acceptable number of sheets
exceeded?
Press [Continue] to print without
using Staple. Press [Cancel] to
cancel the job.
—
Activation error.
―
Failed to activate the application.
Contact administrator.
―
―
Expansion Authentication is
disabled. Turn the main power
switch off and on. If the error exists,
contact administrator.
―
Add paper in cassette #.
Is the indicated cassette out of
paper?
Load paper.
Select the available paper. Press
[Continue] to print.
Add paper in Multi
Purpose tray.
Is the paper of the selected size
loaded in the multi purpose tray?
Load paper.
Select the available paper. Press
[Continue] to print.
Adjusting Scanner.
—
The machine is under the
adjustment to maintain its quality.
Please wait.
—
Message
Checkpoints
Corrective Actions
Reference
Page
Box is not found.
—
The specified box cannot be found.
Job is canceled. Press [End].
—
Box limit exceeded.
*
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Is [End] displayed on the screen?
The specified box is full, and no
further storage is available. Job is
canceled. Press [End]. Try to
perform the job again after printing
or deleting data from the box. The
job is canceled. Press [End]. Refer
to Responding to Send Error for the
error code and corrective actions.
—
—
Repeat Copy box is full, and no
further repeat copy is available.
Press [Continue] to print scanned
pages. Press [Cancel] to cancel the
job.
—