Hole punch mode – TA Triumph-Adler DCC 2520 User Manual
Page 15
English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
13
A maximum of 16 sheets can be bound in a single operation. Up to 64 original sheets can
be loaded at one time.
3
Select other features as required and press Start.
4
Copies will be automatically stapled and ejected
onto the folding tray.
If the maximum capacity is reached, a message
displays. Remove all copies from the folding tray
to continue.
NOTE:
For further information refer to
Center-Folding Unit (option) on page 37.
5
On completion of the job, remove the copies from the folding tray.
Hole Punch Mode
This mode produces hole punched copies
automatically.
Hole Punch mode can be used with Sort: ON,
Staple and Sort: OFF modes.
The following paper sizes can be used:
Inch models
•
2-hole punch: 8
1/2
Ч
14", 8
1/2
Ч
13
1/2
",
8
1/2
Ч
13", 8
1/2
Ч
11", 5
1/2
Ч
8
1/2
", A3, B4, A4, A4R, B5, B5R, A5R and Folio
•
3-hole punch: 11
Ч
17", 11
Ч
8
1/2
", A3 and A4
Metric models
•
2-hole punch: A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8
1/2
Ч
14", 8
1/2
Ч
13
1/2
",
8
1/2
Ч
13", 11
Ч
8
1/2
", 8
1/2
Ч
11" and 5
1/2
×
8
1/2
"
•
4-hole punch: A3, A4, 11
×
17" and 11
×
8
1/2
"
Paper weights must be between 45 g/m
2
and 200 g/m
2
.
NOTE:
Punching requires the optional punching unit. Tray C cannot be specified as the
output destination for punch mode.
1
Select Hole Punch mode on the operation panel of the machine.
NOTE:
Refer to the Operation Guide for the machine for more detailed information.