TA Triumph-Adler DCC 2520 - Manual (Page 23)

English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 21
2 Remove the jammed paper.
3 Open the tray C and front cover.
4 Turn the conveyor knob (D2) to the left to feed the
paper along to enable easy removal.
5 Close Tray C and the front cover, and re-install the finisher back into position on the
machine.
Tray A
If the illustration shown displays on the machine’s
operation panel, there is a paper jam in the
conveyor section to Tray A.
1 Lift open Tray B and remove the jammed paper.