Subaru Robin EX30 - Manual (Page 15)

- 12 -
5-3 DISASSEMBLY PROCEDURE
Step Parts to remove Remarks and procedures Fasteners
1 Drain the engine oil (1) Remove a drain plug (M14 x 12mm)
located on both sides of the case.
Take care not to lose the gaskets.
(2) To discharge oil quickly, remove the oil guage.
14 mm spanner
2 Drain the fuel (1) Drain fuel from the carburetor drain.
(See Figure STEP2-A)
(2) Disconnect the fuel pipe from the carburetor.
(See Figure STEP2-B)
OIL GAUGE
GASKET
GASKET
DRAIN PLUG
STEP 1
STEP 2
STEP 2
STEP2-A STEP2-B