Subaru Robin EX30 - Manual (Page 23)

- 20 -
Step Parts to remove Remarks and procedures Fasteners
20 Rocker cover (1) Remove the rocker cover from the cylinder head.
(2) Remove the gasket (rocker cover). 10 mm box spanner
M6 x 12mm : 4 pcs.
21 Rocker arm Remove the pin (rocker arm) and the rocker arm from
the cylinder head at the compression top dead center.
(See Figure STEP21-A)
ROCKER ARM
(EXHAUST
VALVE SIDE)
PIN
(ROCKER ARM)
CLOSE-UP A
A
ROCKER ARM
(INTAKE VALVE SIDE)
ROCKER COVER
GASKET (ROCKER COVER)
M6 x 12 BOLT : 4 pcs.
STEP 21
STEP 20
ROCKER ARM
(EXHAUST VALVE SIDE)
ROCKER ARM (INTAKE VALVE SIDE)
PIN
(ROCKER ARM) Punch marks
The position of compression top dead center
STEP21-A