Subaru Robin EX30 - Manual (Page 24)

- 21 -
Step Parts to remove Remarks and procedures Fasteners
22 Main bearing cover Remove the fl ange bolts of main bearing cover from the
crankcase.
Remove the main bearing cover while tapping gently
around the cover using a plastic hammer or similar tool.
(See Figure STEP22-A)
Be careful not to damage the oil gauge or oil seal or not
to lose the pipe knocks. 12 mm box spanner
M8 × 35mm : 7 pcs.
MAIN BEARING COVER
M8 x 35mm : 7 pcs.
PIPE KNOCK
STEP 22
STEP22-A