Amprobe AM-140-A - Manual (Page 21)

15
Overload protections:
Am-140-a:
µA & mA: 1A/600V, IR 10kA or better, F fuse
A: 10A/600V, IR 100kA or better, F fuse
V: 1050VRMS, 1450VPEAK
mV, , & others: 600 VDC & VAC RMS
Am-160-a:
µA & mA: 0.44A/1000V, IR 10kA or better, F fuse
A: 11A/1000V, IR 20kA or better, F fuse
V, mV, , & others: 1050VRMS, 1450VPEAK
Transient protection: 8kV (1.2/50µS SURGE)
E.M.C.: Meets en61326-1:2006 (EN55022, EN61000-3-
2, EN61000-3-3, EN61000- 4-2, EN61000-4-3,
EN61000-4-4, , EN61000-4-5, EN61000-4-6,
EN61000-4- 8, EN61000-4-11)
In an RF field of 3V/m: Capacitance function is not specified
Other function ranges: Total accuracy = specified accuracy + 100 digits.
Performance above 3V/m is not specified
Power supply: Single alkaline 9V battery; neda1604a, jis6am6
or Iec6lf22
Power consumption: 6mA typical
Low battery: Below approx. 7V
Apo timing: Idle for 17 minutes
Apo consumption: 55µA typical for am-140-a; 30µA typical for am-
160-a
Dimension: L186mm x W87mm x H35.5mm (7.3in x 3.4in
x 1.4in); L198mm x W97mm x H55mm (7.8in x
3.8in x 2.2in) with holster
Weight: 390 gm (0.9lb); 500 gm (1.1lb) with holster