Amprobe AM-220 Digital-Multimeters - Manual (Page 7)

3
Specifications
GENERAL SPECIFICATIONS
Display:
LCD with a max. reading of 4000
Range control: Auto range & Manual range control
Polarity: Automatic negative polarity indication
Zero adjustment: Automatic
Overrange indication: The “OL” or “-OL” display
Low battery indication: Display “ “ sign
Data hold: Display “ ” sign
Relative measurement: Display “ ” sign
Auto Power Off: Display “ ” sign. After 10 minutes without switching modes
or pressing a key the meter will switch to standby mode. Press
any key or switch selector switch to exit standby mode. To dis-
able auto power off, press and hold SELECT key while rotating
the selector switch from off position.
Safety standards: EMC/LVD. The meter is up to the standards of
EN61010-1:2001; Double Insulation, Pollution Degree 2,
Overvoltage Category III-600V.
Operating environment: Temperature 0°C to 40°C (32°F to104°F)
Humidity °< 80% RH
Storage environment: Temperature -20°C to 60°C (-4°F to140°F)
Humidity °< 90% RH
Power supply: 2x1.5V “AA” batteries
Dimension: 156(H) x 86(W) x 38(D) mm (6.1“ x 3.4“ x 1.5“)
Weight: Approx. 260g (9.2 oz.) including battery
ELECTRICAL SPECIFICATIONS
Accuracies are ±(% of reading + number in last digit) at 23 ± 5°C, °< 75% RH
DC VOLTAGE
Range Accuracy Resolution
400mV
± ( 0.5%+2 )
0.1mV
4V 1mV
40V 10mV
400V 100mV
600V ± ( 0.8%+3 ) 1V
Overload protection: 600V DC or AC RMS
Impedance: 10MW, More than 100MW on 400mV range
�
Warning! Dangerous Voltage (Risk of electric shock).
�
Caution! Refer to the user’s manual before using this Meter.
�
Double Insulation (Protection Class II).
�
Alternating Current (AC).
�
Direct Current (DC).
Complies with European Directives
Either DC or AC.
�
Ground (maximum permitted voltage between terminal and ground).
�
The RESPONSIBLE BODY shall be made aware that, if the instrument
is used in a manner not specified by the manufacturer, the protection
provided by the instrument may be impaired.
�
The finger or any part of your body shall not be beyond the barrier of the
test probe when measuring.
�
Conforms to relevant Australian standards
Do not dispose of this product as unsorted municipal waste