Amprobe TMA-21HW Hot-Wire-Anemometer - Manual (Page 8)

• In the setting mode, push this key move flashing cursor to left.
• In the TEST ID 0 to 4 mode, push this key one time store the one data to
memory.
• In the TEST ID number 5 to 9 mode, push this key to start auto data memory
mode, push this key again to exit this mode.
15  keys :
• In the setting mode, push “” keys to increase or decrease the displayed
setting.
• In the READ mode, push “” keys to select increase or decrease the
memory address.
• In the temperature display mode, push °C or °F key to switch the units
between Celsius (°C) and Fahrenheit (°F).
16 READ key :
• In the setting mode, push this key move flashing cursor to right.
• Push this key to enter the data memory READ mode; push this key for 2
seconds to exit this mode.
17 Sensor protection tube.