Amprobe GP-1 Earth-Tester-Ground-Probe - Manual (Page 16)

Battery Replacement
Note: All memory will be lost if batteries are removed. Download memory or record values before
replacing batteries. Two point calibration must also be performed after battery removal.
When batteries need to be replaced, “BAT” will be
displayed on your unit.
• Turn the GP-1 power OFF.
• Remove the test leads from the test lead/cable
input ports.
• With a screwdriver, unscrew the battery cover
screw by turning counterclockwise.
• Install 4 “D” size alkaline batteries. Amprobe
Model MN-1300 or equivalent. Note position
of battery symbols in holder.
• Replace battery cover and battery cover screw.
View of inside battery cover
LIMITED WARRANTY
Congratulations! Your new AMPROBE instrument has been tested by qualified factory technicians
according to the long established standards of AMPROBE INSTRUMENT. You will find it to be of
superior quality and craftsmanship and that this product contains the best in components and
workmanship.
AMPROBE is pleased to extend you a limited warranty against defective materials, and/or workmanship
for a period of one (1) year from the date of purchase, provided that, in the opinion of the factory, the
instrument has not been tampered with or taken apart.
Should your instrument fail due to defective materials and/or workmanship, during the one year
warranty period,return it along with a copy of your dated bill of sale. Your bill of sale must iden -
tify this instrument by model number and serial number.
For your protection, please use the instrument as soon as possible. If damaged, or should the need
arise to return your instrument, it must be securely wrapped (to prevent damage in transit) and sent pre-
paid via Air Parcel Post insured or U.P.S. where available to:
Service Division
Miami, Florida
Telephone: 305-423-7500 Fax: 305-423-7554
Outside the U.S.A.the local Amprobe representative will assist you. Above limited warranty covers
repair and replacement of instrument only and no other obligation is stated or implied.
For Technical Support on this or any Amprobe product call:
1-800-327-5060
Page 16