Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 121)

Setting Unit Policies
www.lsi.com/channel/products 109
• Under FreeBSD use the fsck command.
• Under Linux use the fsck command.
• Under Mac OS X, you can use the First Aid tab in the Disk Utility—
select the disk on the left and then click
Verify Disk . If verification
encounters problems, you can then use the Repair Disk option on the
same screen.
• Under OpenSolaris you should follow your operating system’s guide to
perform a file system check.
• Under VMware you should follow your operating system’s guide to
perform a file system check.
• Under Windows, you can do this by right-clicking on the Drive and
choosing Properties; then on the Tools tab, click Check Now.
To set the Overwrite ECC policy in 3DM2
1 Choose Management >> Controller Settings from the menu bar in
3DM2.
2 In the Unit Policies section of the Controller Settings page, check the
boxes to select the policies you want to be in effect for each unit
The page refreshes, and a message at the top confirms the change you
have made.
To set the Continue on Source Error When Rebuilding policy in
3BM
1 At the main 3BM screen, select the unit by highlighting it and pressing
Enter .
An asterisk appears in the left-most column to indicate that it is selected.
2 Tab to the Maintain Unit button and press Enter .
3 On the pop-up menu, select Configure and press Enter .
4 In the Configure Disk Array screen, Tab to the field Continue on
Source Error When Rebuilding .
5 Press Enter to display the choices, use the arrow keys to select the
setting you want (Enabled or Disabled), and press Enter again to choose
it.
6 Tab to the OK button and press Enter to select it.
You return to the main 3BM screen.