Avago Technologies AcceleRAID 150 - Manual (Page 15)

Manual No. 775020 2-1
Chapter 2
Installation
This chapter describes:
• Before you begin
• Installation checklist
• Connectors, Jumpers, and LED’s
• Safety considerations: Caution and Warning notes
• Installing the AcceleRAID 1500 controller
AcceleRAID 150 with Standard PCI Bus
☛
Note
If you will be installing the AcceleRAID 150
controller with the SISL feature, please go to the
section titled “AcceleRAID 150 with SISL (SCSI
Interrupt Steering Logic)” on page 2-15.

Caution
If an operating system or existing data resides on
drives already installed on the system, a full backup
should be performed on these drives prior to this
installation.