Avago Technologies AcceleRAID 150 - Manual (Page 5)

About This Manual
This installation guide covers hardware set-up and configuration procedures
necessary for the installation of the Mylex AcceleRAID 150 PCI to Ultra2
SCSI RAID controller.
Chapter 1 describes the controller, standard package contents, and user-
supplied items necessary for installation.
Chapter 2 describes steps to be performed prior to controller installation
and the physical installation of the controller.
Chapter 3 describes controller board start-up and the BIOS options.
Appendix A describes installation notes.
Appendix B describes hardware and environmental specifications.
Appendix C describes error messages and how to correct problems causing
errors.
Appendix D describes enclosure management.
Appendix E provides regulatory information.
Conventions
Throughout the manual, the following conventions are used to describe user
interaction with the product:
prompt This style of type indicates screen display messages.
Enter Press the key labeled “Enter” (or “Delete,” etc.).
☛
Note
Supplementary information that can have an effect on
system performance.

Caution
Notification that a proscribed action has the potential
to adversely affect equipment operation, system
performance, or data integrity.

WARNING
Notification that a proscribed action will definitely
result in equipment damage, data loss, or personal
injury.