Pc i slo ts – Avago Technologies AcceleRAID 150 User Manual
Page 21
Advertising
Installation
Manual No. 775020
2-7
Follow these installation steps:
1. Choose any available standard PCI slot as shown in Figure 2-3.
Figure 2-3. Choose an Available PCI Slot
2. Remove the metal cover plate from the slot’s access port (usually at the
back of the cabinet). Save the retaining screw as shown in Figure 2-4.
.
Figure 2-4. Remove the Metal Plate
PC I Slo ts
Remove screw to remove
metal plate. Save screw to
tighten the controller board.
Metal Plate
Advertising