PLANET VIP-193 - Manual (Page 47)

Authentication Mode. You have a choice of Auto Switch, Share Key, Open System, and WPA-
PSK. To change the Authentication Mode, select Edit. A new window will open. Scroll through the
modes, and select the appropriate mode. Select Save to save the new Authentication Mode, or
select Exit to return to the Edit Profile menu without changing the Authentication Mode.
Proceed to the section for the Authentication Mode you have selected.
Auto Switch, Share Key, or Open System
Encryption. You have a choice of Disabled and WEP encryption. To change the Encryption
method, select Edit. If you select Disabled, there are no other settings to change. If you select
WEP, there are two more settings available, Key Index and WEP Key.
Key Index. For the index of transmit keys, you have a choice of 1-4. To specify which WEP key
the Wi-Fi Phone will use, select Edit. A new window will open. Scroll through the numbers, and
select the appropriate transmit key number. Select Save to save the new transmit key number, or
select Exit to return to the Edit Profile menu without changing the number.
WEP Key. To enter the WEP Key, select Edit. Enter the new WEP Key in the new window. Press the
center selection key to save the new WEP Key, or select Exit to return to the Edit Profile menu
without changing the key.
802.1x. You have a choice of Enable and Disable. The Enable option configures the Wi-Fi Phone for
a network using 802.1x authentication. To change the 802.1x setting, select Edit.
If 802.1x is enabled, configure the EAP Type setting. Select Edit. You have a choice of TLS, MD5, and
PEAP. Select Save to save the new EAP Type, or select Exit to return to the Edit Profile menu
without changing the EAP Type.
Figure 4-35: Change
Authentication Mode
Figure 4-37: Enter WEP
Key
Figure 4-36: Edit WEP
Key
Figure 4-38: Change
EAP Type (802.1x)
42
Chapter 4: Configuring the Wi-Fi Phone