Chapter 5: for administrators only, Administrator settings of the wi-fi phone, Accessing the web-based utility – PLANET VIP-193 User Manual
Page 70
Chapter 5: For Administrators Only
Administrator Settings of the Wi-Fi Phone
In addition to the menu choices for end users, you have access to SIP Settings, Phone Upgrades, and Auto-
Provisioning. Refer to the rest of the user guide to continue setting up the Wi-Fi Phone.
Out of the box, you have complete access to all settings of the Wi-Fi Phone. After configuring the SIP
Settings and Auto-Provisioning for the phone, make sure to access the Web-based utility and turn on
the option to protect admin access for all phones.
Accessing the Web-based Utility
For your convenience, you can configure admin settings for the Wi-Fi Phone either on the Wi-Fi
Phone or through the Web-based utility provided. The Web-based utility is available for both user and
admin-level access of the Wi-Fi Phone.
1. Retrieve the phone’s IP address. From the phone, press the Meny soft key and navigate down to
Information and press the center selection key. The IP address is located here.
2. From a Web browser in the Address field, enter http:// and the ip address.
3. The default User Name is admin and the Password is WL800ADM. You can change your
password later in this utility or through the XML configuration file.
Chapter 5: For Administrators Only
Figure 5-1: Admin Login on
Web-based utility
65