PLANET ADN-4100 - Manual (Page 10)

1
1 Overview
The ADN-4100 supports multiple line modes. It provides four 10/100Base-TX
Ethernet interfaces at the user end. The device provides high speed ADSL
broadband connection to the Internet or Intranet for high-end users, such as net
cafes and office users. It provides high performance access to the Internet,
downstream up to 24 Mbps and upstream up to 1 Mbps.
The device supports WLAN access. It can connect to the Internet through a
WLAN AP or WLAN device. It complies with IEEE 802.11, 802.11b/g/n
specifications, WEP, WPA, and WPA2 security specifications.
1.1 Safety Precautions
Refer to the following instructions to prevent the device from risks and damage
caused by fire or electric power:
 Use volume labels to mark the type of power.
 Use the power adapter packed within the device package.
 Pay attention to the power load of the outlet or prolonged lines. An
overburden power outlet or damaged lines and plugs may cause electric
shock or fire accident. Check the power cords regularly. If you find any
damage, replace the power cords at once.
 Proper space left for heat dissipation is necessary to avoid damage caused
by overheating to the device. The long and thin holes on the device are
designed for heat dissipation to ensure that the device works normally. Do
not cover these heat dissipation holes.
 Do not put this device close to a place where a heat source exits or high
temperature occurs. Avoid the device from direct sunshine.
 Do not put this device close to a place where it is over damp or watery. Do
not spill any fluid on this device.
 Do not connect this device to any PCs or electronic products, unless our
customer engineer or your broadband provider instructs you to do this,
because any wrong connection may cause power or fire risk.
 Do not place the device on an unstable surface or support.