3 access controls, 3 access, Controls – PLANET ADN-4100 User Manual
Page 91
Advertising
82
In this page, you can upgrade the firmware of the device. To update the firmware,
do as follows:
Step 1
Click Browse…to select the file.
Step 2
Select Clear Config.
Step 3
Click Update Firmware to update the configuration file.
The device loads the file and reboots automatically.
Caution:
Do not turn off your device or press the Reset button when the procedure
is in progress.
3.4.3 Access Controls
Choose Management > Access Controls. The ACCESS CONTROLS page as
shown in the following figure appears:
Advertising
This manual is related to the following products: