PLANET ADN-4100 - Manual (Page 17)

3 Web Configuration
This chapter describes how to configure the device by using the Web-based
configuration utility.
3.1 Accessing the Device
The following describes how to access the device for the first time in detail.
Step 1 Open the Internet Explorer (IE) browser and enter http://192.168.1.1
in the address bar.
Step 2 The LOGIN page as shown in the following figure appears:
In this page, enter the user name and the password. Then, click login.
 The user name and the password of the super user are admin and admin
respectively.
 The user name and the password of the normal user are user and user
respectively.
If the login information is incorrect, the page as shown in the following figure
appears:
8