PLANET BM-2101 - Manual (Page 42)

3.8 SNMP
Step1. In Configure Æ SNMP Æ Enable SNMP Agent and enter the following
setting
„ Appliance Name : Can customize the name. Default setting is
Bandwidth Management Gateway.
„ Appliance Location : Can customize the settings. Default setting is
Taipei, Taiwan.
„ Community : Can customize the settings. Default setting is public.
„ Contact Person : Can customize the settings. Default setting is
root@public.
„ Description : Can customize the settings. Default setting is Multi
Home Appliance.
„ Click OK .
„ Complete the SNMP Agent settings. The MIS engineer can monitor
BM-2101’S operating status by the SNMP Agent message recipient
installed in administrator’s PC.
SNMP Agent setting