ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 17)

MVI56E-MNET / MNETXT ♦ ControlLogix Platform Start Here
Modbus TCP/IP Interface Module User Manual
ProSoft Technology, Inc. Page 17 of 181
April 23, 2014
4 Make a note of the slot location. You must identify the slot in which the
module is installed in order for the sample program to work correctly. Slot
numbers are identified on the green circuit board (backplane) of the
ControlLogix rack.
5 Turn power ON.
Note: If you insert the module improperly, the system may stop working or may behave
unpredictably.
Note: When using the MVI56EMNETXT, you must use the 1756-A5XT or 1756-A7LXT chassis. In
these chassis, modules are spaced further apart than in standard ControlLogix chassis. Blank
spacers are inserted between active modules.