ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 94)

Diagnostics and Troubleshooting MVI56E-MNET / MNETXT ♦ ControlLogix Platform
User Manual Modbus TCP/IP Interface Module
Page 94 of 181 ProSoft Technology, Inc.
April 23, 2014
If PCB is unable to connect to the module:
1 Click the B ROWSE D EVICE ( S ) button to open the ProSoft Discovery Service.
Select the module, then right-click and choose S ELECT FOR PCB.
2 Close ProSoft Discovery Service, and click the C ONNECT button again.
3 If these troubleshooting steps fail, verify that the Ethernet cable is connected
properly between your computer and the module, either through a hub or
switch (using the grey cable) or directly between your computer and the
module (using the red cable).
If you are still not able to establish a connection, contact ProSoft Technology for
assistance.