ProSoft Technology MVI56E-61850S User Manual
Page 27
MVI56E-61850S ♦ ControlLogix Platform
Contents
IEC 61850 Server Communication Module
User Manual
ProSoft Technology, Inc.
Page 27 of 81
September 4, 2014
If the IP Filter is enabled, you will need to configure the IP addresses to be filtered.
1 Double-click the 61850S
IP
F
ILTER
L
IST
icon.
2 Click A
DD
R
OW
then E
DIT
R
OW
to enter the IP address information.
Name
Range
Description
Action
Allow/Deny
Select Allow for allowed IP or subnet for Whitelist filter type.
Select Deny for denied IP or subnet for Blacklist filter type.
IP/Subnet
Enter an IPv4 address or subnet in standard dotted notation. The
candidate IP matches this entry if it matches this IP or subnet.
Subnet mask
Enter an IPv4 subnet mask in standard dotted notation. The candidate
IP and the IP/subnet match if they are the same under this mask.