ProSoft Technology MVI56E-61850S - Manual (Page 9)

MVI56E-61850S ♦ ControlLogix Platform Contents
IEC 61850 Server Communication Module User Manual
ProSoft Technology, Inc. Page 9 of 81
September 4, 2014
1.2 Package Contents
The following components are included with your MVI56E-61850S module, and are all
required for installation and configuration.
Important: Before beginning the installation, please verify that all of the following items are present.
Qty. Part Name Part Number Part Description
1 MVI56E-61850S Module MVI56E-61850S IEC 61850 Server Communication Module
1 Ethernet Cable RL-CBL025 Straight-through Ethernet cable
1 ProSoft Solutions DVD DVD-001 Contains sample programs, utilities, and documentation.
Files can also be found at
http://www.prosoft-technology.com
If any of these components are missing, please contact ProSoft Technology Technical
Support for replacement parts. If the DVD is not present, please visit
http://www.prosoft-technology.com for the latest files.
1.3 Setting Jumpers
The Setup Jumper acts as "write protection" for the module’s flash memory. In "write
protected" mode, the Setup pins are not connected, and the module’s firmware cannot be
overwritten. The module is shipped with the Setup jumper OFF. Do not jumper the Setup
pins together unless you are directed to do so by ProSoft Technical Support (or to update
the module firmware).
The following illustration shows the MVI56E-61850S jumper configuration with the Setup
Jumper OFF.