Kurzweil PC3 SoundEditor - Manual (Page 28)

28
MIDI Channel Toolbar
The toolbar above the MIDI Channel Display allows you to view the Channel Mixer window and
access related file transfer commands for the MIDI Channel assignments:
Clicking on the MIXER button
opens the Channel Mixer
Window (see Chapter 8).
Clicking the RECEIVE button
fills the MIDI Channel Display
with the Programs assigned to
the PC3‟s sixteen MIDI
Channels.
The WRITE button allows you to select a memory location where the currently selected
program will be written. Clicking the WRITE button produces a window like the one shown
below, allowing you change the name of the Program, select or change the category
assignment, and chose the new memory location:
Modes Toolbar - MIDI Button
The MIDI button in the Modes Toolbar corresponds to the physical MIDI button on the PC3,
allowing you to adjust the parameters for the PC3‟s MIDI operation.
Clicking on SoundEditor‟s MIDI button (or pressing the F8 key) produces a drop-down window
displaying the MIDI Settings parameters. Here you can configure the parameters for
transmitting and receiving MIDI, including the selection of the PC3 control setup, transposition,
velocity and pressure mapping, and other related MIDI functions.
Note that for any changes to take effect, they must be written to the PC3 using the WRITE
button. After writing the changes, click on the OK button to exit, or click on OK at any time to
simply abandon any changes and exit the window.