Kaon HD 3000 - Manual (Page 16)

ENG - 16
4. Basic Functions
4.1 Changing the Channel
After the television channels have been programmed, you will see programme information for a few seconds each
time you change the channels.
You can change the current channel using one of the following methods.
 You can change the channel using the CH +/ - button and change to
desired channel by entering its channel number with the Numeric (0-9)
buttons.
 Press the PRE-CH button to return to the previous channel.
 Press the TV/RADIO button to switch between TV channels and radio
channels.
 You can change channel by using the channel banner, simple channel list,
or program guide.
4.2 Volume Control
 Press the VOL +/- buttons to adjust the volume level.
Volume level bar is displayed.
 Press the Mute button to temporarily stop the volume.
To cancel mute, press the Mute button again or press the VOL +/ -
buttons.
4.3 Audio
If the current programme is available in multiple audio languages, you can
select the language that you wish to listen to.
1. Press the AUDIO button to display the audio menu.
2. Press the / button to select the required audio language and press
the OK button.
3. Press the / button to select audio output (Mono, Left, Right, or
Stereo).
B
You can change a default audio language in the system setting menu mode.