Rf safety information, Radio frequency energy, Declaration of conformity - sar – ZTE MF75 User Manual
Page 34
MobiiConnect 4G Manual
34
RF Safety Information
Radio Frequency Energy
Declaration of Conformity - SAR
The MobiiConnect 4G has internal antennas. For optimum performance with minimum power consumption do not
shield the device or cover with any object.
Covering the device affects signal quality and may cause it to operate at a higher power level than needed.
The MobiiConnect 4G is a low-power radio transmitter and receiver. When switched on, it intermittently
transmits radio frequency (RF) energy (radio waves).
The transmit power level is optimized for best performance and automatically reduces when there is good quality
reception.
Under poor network conditions the modem transmits at a higher power level and may get hot.
The MobiiConnect 4G is designed to be used in close proximity to the body. We declare that the
product detailed in this manual, and in combination with our accessories, conform to the essential
requirements of The Radio Communications Standard (Electromagnetic Radiation Human Exposure)
2003 and the Australian Communications and Media Authority Section 376 of the Telecommunications
Act 1997 when used at a distance of not less than 5mm from the body. The worst-case SAR result is
published on zte.com.au