Helpful shooting features, Displaying grid lines magnifying the area in focus, Magnifying the area in focus – Canon PowerShot SX410 IS User Manual
Page 38: Displaying grid lines
38
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Magnifying the Area in Focus
Still Images
Movies
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1
Configure the setting.
●
Press the [
] button, choose [AF-
Point Zoom] on the [ ] tab, and then
2
Check the focus.
●
Press the shutter button halfway. The
face detected as the main subject is now
magnified.
●
To restore the original setting, choose
[Off] in step 1.
●
The area in focus is not magnified in the following cases when the
shutter button is pressed halfway.
-
If a face was not detected, if the person is too close to the
camera and their face is too large for the screen, or if the
camera detects subject movement
-
When digital zoom is used (= 33)
-
When Tracking AF is used (= 56)
-
When a TV is used as a display (= 87)
Helpful Shooting Features
Displaying Grid Lines
Still Images
Movies
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
●
Press the [
] button, choose [Grid
Lines] on the [ ] tab, and then choose
●
Once the setting is complete, grid lines
are displayed on the screen.
●
To restore the original setting, repeat this
process but choose [Off].
●
Grid lines are not recorded in your shots.