Canon PowerShot SX410 IS - Manual (Page 58)

58
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Flash
Changing the Flash Mode
Still Images Movies
You can change the flash mode to match the shooting scene. For details
on the flash range, see “Flash Range” (= 114).
1
Lift the flash.
2
Configure the setting.
● Press the [ ] button, press the [ ][ ]
buttons to choose a flash mode, and then
press the [ ] button.
● The option you configured is now
displayed.
● The setting screen cannot be accessed by pressing the [ ]
button when the flash is lowered. Lift the flash with your finger in
advance.
Auto
Fires automatically in low-light conditions.
On
Fires for each shot.
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
Shooting with the AF Lock
Still Images Movies
The focus can be locked. After you lock the focus, the focal position will
not change even when you release your finger from the shutter button.
1
Lock the focus.
● With the shutter button pressed halfway,
press the [ ] button.
● The focus is now locked, and [ ] is
displayed.
● To unlock the focus, release the shutter
button and press the [ ] button again. In
this case, [ ] is no longer displayed.
2
Compose the shot and shoot.