Xsr rebooting characteristics, Initialization output, Xsr rebooting characteristics -33 – Enterasys Networks XSR-3150 User Manual
Page 77: Initialization output -33, Xsr rebooting, Characteristics, Refer to
XSR Rebooting Characteristics
XSR Getting Started Guide 3-33
Create the multi-point VPN virtual port required to terminate many clients:
XSR(config)#interface vpn1 multi-point
XSR(config)#description “VPN Virtual Interface Int0”
XSR(config)#ip address 10.10.10.1/24
XSR(config)#ip rip send version 2
XSR(config)#ip rip receive version 2
XSR(config)#ip multicast-redirect tunnel-endpoint
Enable RIP routing on all networks except the public interface:
XSR(config)#router rip
XSR(config)#network 172.16.10.0
XSR(config)#network 10.0.0.0
XSR(config)#passive-interface gigabitethernet2
XSR(config)#no receive-interface gigabitethernet2
XSR(config)#distribute-list 1 out vpn1
Finally, attach the crypto map statement to the public interface:
XSR(config)#interface gigabitethernet 2
XSR(config-if<F2>)#crypto map test
XSR(config-if<F2>)#end
XSR#copy running-config startup-config
XSR Rebooting Characteristics
When the XSR reboots, it conforms to the behavior described in this section. The output displayed
at the CLI describes router initialization.
Initialization Output
The XSR displays the following output when it initializes (cold reboot):
X-Pedition Security Router Bootrom
Copyright 2003 Enterasys Networks Inc.
HW Version: 9002914-04 REV0A Serial Number: 2914024201123206
CPU: Broadcom BCM1250 Rev 2
VxWorks version: VxWorks5.4.2
Bootrom version: 1.5
Creation date: Aug 26 2003, 13:23:16
Warm Start : from cli
Testing Bootrom Integrity << PASSED >>
auto-booting...
Verifying flash:xsr3000.fls file ...
Router S/W size=11989192 sum=0xedd1 compressed_size=4109639 entry=0x80020000
Diagnostics size=1459880 sum=0x8154 compressed_size=614417 entry=0x80020000
RouterCpu1 S/W size=1520104 sum=0x4a2c compressed_size=652528 entry=0x82020000