Enterasys Networks XSR-3150 - Manual (Page 80)

Bootrom Monitor Mode Commands
3-36 Software Configuration
All the commands in each group can be listed by entering the command group letter. The main
menu provides the following functions:
• Reboot warm or cold
• Update Bootrom
• File system-related commands for the Flash ROM file system
• Modify network parameters
• Various status/show commands
• Version number
• Hardware information
• Display crash info
• Display or change date and time on real-time clock if present
• Commands for development use only
bc
This command initiates a cold reboot.
bw
This command initiates a warm reboot.
bp
This command changes the Bootrom password. The default password is blank. You are prompted
to enter a password by the following script:
XSR-3150:bp
Enter current password:
Enter new password: ******
Re-enter new password: ******
Password has changed.
bu
This command updates the bootrom from a local file. You are prompted to enter data by the
following script. When the “
Proceed with erasing Bootrom in flash ...” statement appears,
enter y . Be sure not to interrupt the process or power down the XSR or it may be affected
adversely. After you have updated this file, you can delete it from Flash to conserve space for
other files.
XSR-3150: bu btXSR3000_1_2.fls
Verifying btXSR3000_1_2.fls file ...
Caution: Upon accessing Bootrom monitor mode, if you do not provide the password (if
configured earlier with the bp command) when prompted or enter an incorrect password five
times, the XSR will delete your configuration and reinstitute factory default settings. This function
is similar to pressing the reset button on the XSR-1800 Series routers.