Xiaomi Mi Robot Vacuum-Mop 2 Pro+ - Manual (Page 14)

13
How to Use
Using the Mopping Function
1. Install the mop pad 3. Install the mopping assembly
4. Start mopping 2. Fill the water tank
Open the water tank lid, fill the tank with water, then securely close the lid.
Dampen the mop pad and wring out excess water. Slide the pad all the
way into the slot of the water tank until it is securely in place.
To install the mopping assembly, slide it into the back of the vacuum-
mop until it clicks into place.
Press the button or use the Mi Home/Xiaomi Home app to start the
cleanup. The vacuum-mop will automatically recognize the mopping
assembly and begin mopping and dispensing water as needed.
·Do not add hot water to the water tank, as this may cause the tank to become deformed.
·To avoid clogging, do not add any cleaning agents or disinfectants to the water tank.
·Do not use the mopping function on carpet.
·The mop pad should be cleaned after every 30 minutes of use to ensure adequate
water flow and cleaning effectiveness.
Notes:
Notes: