Xiaomi Mi Robot Vacuum-Mop 2 Pro+ - Manual (Page 19)

18
Care & Maintenance
Mop Pad
Note: Filter must be fully dry before use (allow at least 24 hours).
Note: Do not attempt to clean the filter with a brush or finger.
* After-each-use cleaning is recommended.
Note: It is recommended to change the mop pad every 3 to 6 months.
3. Remove the filter, as illustrated, then rinse it out and lightly tap on the
edge of the filter to remove dust and debris.
4. Place the dust compartment and filter aside to dry before reinstallation.
1. Pull the mop pad off of the mopping assembly to remove it.
2. Clean and dry the mop pad.
Remove the pad from the mopping assembly before cleaning it, and
make sure dirty water does not flow back into the water outlet to avoid
clogging. Do not press too hard on the mop pad, as this can hinder its
performance. The mop pad should be cleaned before each use.