Roland VC-100UHD 4K Video Scaler/Converter/Streamer - Manual (Page 5)

5
Basic Operations
Video Processing in the VC-100UHD (Overview)
This unit is a scaler equipped with SDI and HDMI inputs and outputs. It can convert between SDI and HDMI, and perform format conversion.
It has three processing systems, MAIN, SUB, and USB, and you can individually specify scaling and output format for each of these.
These processing settings are managed in units called “channels.”
A channel saves the input source selection, the scaler settings for each processing, and the audio settings (p. 13); when you use Setup Menu
screen 0 Root “Processing” 0 “Input” to select a channel, the settings saved in the channel are applied to the processing.
Each processing differs in functionality such as the effects that are provided. There are also some functions such as the main processing’s rotate
function or HDMI thru function that can be obtained by limiting the operation of the sub processing.
Main Processing
4K Scaler Output Format
Output ROI
Sub Processing
4K Scaler Output Format
Output ROI
USB Streaming
FHD Scaler Output Format
Source
Selector
SDI
HDMI
SDI
HDMI
Cross-Point
USB
INPUT OUTPUT
Input Source
Processing Scaler Settings
Channel 1–8
In the Setup Menu, use Root “Processing” 0 “Input”
to select a channel
Apply the settings
Operating the [VALUE] Knob
Although you can change the value more greatly by turning the [VALUE] knob while pressing it, you can use the following functions to edit the
value even more efficiently.
(1)
If you turn the [VALUE] knob while pressing it, and then stop turning it but continue to press it, the value changes continuously.
(2) If you continue pressing the knob and repeat operation (1), the change becomes faster each time you repeat this.
(3)
If you continue pressing the [VALUE] knob and then press the [SETUP] button, the value returns to the original value before
editing.
(4) If you continue pressing the [VALUE] knob and then long-press the [SETUP] button, the value returns to the default value.