Samson Q2U Recording & Podcasting Pack (Gray) - Manual (Page 12)

10
5. To set the direct monitoring level or the
playback volume in the headphones,
click the Properties button in the
Playback tab instead, and open the
Levels tab. Adjusting the Speakers
slider or pressing the pushbuttons on the
mic changes the headphone level. To
turn off the zero-latency hardware direct
monitoring (if you want to use software
play-through with effects instead), click
the Mute button (speaker symbol) in the
right of the Microphone section (figure
11).
Installing the Q2U
Figure 10
Figure 11