Emerson Process Management 99 - Manual (Page 20)

Type 99
©Fisher Controls International, Inc., 1979, 2008; All Rights Reserved
The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher is a mark owned by Fisher Controls, Inc., a
business of Emerson Process Management.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Process Management does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any Emerson
Process Management product remains solely with the purchaser.
Industrial Regulators
Regulator Division
Emerson Process Management
USA - Headquarters
McKinney, Texas 75070 USA
Tel: 1-800-558-5853
Outside U.S. 1-972-548-3574
Asia-Pacific
Shanghai, China 201206
Tel: +86 21 2892 9000
Europe
Bologna, Italy 40013
Tel: +39 051 4190611
natural gas Technologies
Regulator Division
Emerson Process Management
USA - Headquarters
McKinney, Texas 75070
Tel: 1-800-558-5853
Outside U.S. 1-972-548-3574
Asia-Pacific
Singapore, Singapore 128461
Tel: +65 6777 8211
Europe
Bologna, Italy 40013
Tel: +39 051 4190611
Gallardon, France 28320
Tel: +33 (0)2 37 33 47 00
TESCOM
Regulator Division
Emerson Process Management
USA - Headquarters
Elk River, Minnesota 55330 USA
Tel: 1-763-241-3238
Europe
Selmsdorf, Germany 23923
Tel: +49 (0) 38823 31 0
For further information visit www.emersonprocess.com/regulators
Type 61HP (Extra High Pressure) Pilot
(Figure 12) (continued)
Key Description Part number
45 Adjusting Screw, Plated carbon steel
Standard 1C216032992
47 Cap Screw, Plated steel (8 required) 1B787724052
49 Relief Valve Spring, 316 Stainless steel 1C374037022
50 Relief Valve Plug, 316 Stainless steel 1K377535162
52 Bleed Orifice
Brass 1B329014012
53 Loading Tubing
For use with all standard regulators
Copper 1D7702000A2
317 Stainless steel 0500213809W
For use with 1000 psig (69,0 bar) maximum
inlet regulator, Steel 1K5466X0042
55 Pipe Nipple, Plated steel (2 required) 1C488226232
60 Pipe plug, Steel (not shown) 1A649528982
68 Spring Seat, Plated steel 10A3963X012
72 Type Y602-12 Vent Assembly (for use only
with tapped spring case 20A4735X012),
Zinc with 18-8 Stainless steel screen 27A5516X012
82 Locknut, Plated steel 1A352224122
116 Yoke Cap, 416 Stainless steel 13A9836X012
117* Inlet Valve Plug
304 Stainless steel/Nitrile (NBR) 1D5604000B2
304 Stainless steel/Fluorocarbon (FKM) 1N3798000C2
Key Description Part number
118 Relief Valve Cap
Brass 1D904914012
303 Stainless steel 1D904935072
119 Relief Valve Body
Brass 1D904814012
316 Stainless steel 1D904835072
120 Spring Seat
Brass 1K377718992
316 Stainless steel 1K377735072
121 Spring Seat Washer
Brass 1B495118992
316 Stainless steel 1K377835072
122 Pipe Bushing, Carbon-plated steel 1C379026232
123 Cap Screw, Plated steel (6 required) 1P327028982
124 Valve Spring, 316 Stainless steel 1B797937022
125 Flange Adaptor, Steel 23A9846X012
126* Gasket, Composition 0U0365X0032
128 Diaphragm Nut, Plated steel 1A346524122
129* Valve Spring Seat, Aluminum 1L251135072
130 Machine Screw, 303 Stainless
steel (4 required) 1A866935032
131 Pipe plug, Steel (not shown) 1A369224492
150 Diaphragm Insert (2 required)
Nitrile (NBR) 13A9842X012
Fluorocarbon (FKM) 13A9842X022
152 Drive Screw, 18-8 Stainless
steel (2 required) 1A368228982
153 Seal Washer, Nitrile (NBR)/Plated
steel (6 required) 13A9849X012
*Recommended Spare Parts