Power supply, Choosing a power source, For best results and no leakage – SPYPOINT FLEX-G36 Cellular Trail Camera (2-Pack) User Manual

Page 7: How to install aa batteries properly, An external 12 v battery, Managing various camera power supply

Advertising
background image

7

FLEX

SPYPOINT

CHOOSING A POWER SOURCE

3 options are available to you:

Alkaline or lithium AA batteries

Rechargeable battery 12 V

(#KIT-12V sold separately)

Rechargeable battery pack 7,4 V

(#LIT-22 sold separately)

NOTE

We suggest using a SPYPOINT #LIT-22 rechargeable lithium battery pack with

your camera. It offers a longer battery life than AA batteries, and saves money

over the life of the camera.

FOR BEST RESULTS AND NO LEAKAGE

• Use only new alkaline or lithium batteries.
• Do not mix new and old batteries.
• Do not use rechargeable AA batteries

(their lower voltage will generate operational issues).

HOW TO INSTALL AA BATTERIES PROPERLY

• Unlock the latch and open the FLEX door.
• Place the battery holder back into the battery

compartment with arrows facing up (See Photo)

• Insert the AA batteries into the battery holder

following polarity (+) and (-) indications.

• Place the battery holder back into the battery

compartment.

AN EXTERNAL 12 V BATTERY

• The camera was designed to

recognize and use an optional

power source other than the

8 AA batteries.

• You can purchase a 12 V cable

and battery kit (like the #KIT-12V,

sold separately). Simply plug the

12 V cable into the 12 V jack of

the camera and connect the

other cable end to the 12 V battery.

MANAGING VARIOUS CAMERA POWER SUPPLY

If you choose to plug an external 12 V battery (#KIT-12V, sold separately)

into your camera, it becomes your camera’s new primary power source.

The AA batteries will only be used once the 12 V battery is depleted.

You can check the battery level on your device or in the mobile application:

• In the application: on the home page, you will see the battery charge level

for each of your devices. You can access more details on the status of your

battery by going to the STATUS page. When the battery logo turns red, we

suggest that you change the batteries before it is completely drained.

• Once the device is powered on. There are four green lights within the battery

icon indicating the battery level.

Power Supply

Advertising
This manual is related to the following products: