Entering a password to use the projector – Epson PowerLite 2250U 5000-Lumen WUXGA 3LCD Projector User Manual
Page 138
Advertising
138
Parent topic:
Related tasks
Entering a Password to Use the Projector
If a password is set up and a
Power On Protection
password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
1.
Press and hold down the
Num
button on the remote control while you enter the password using the
numeric buttons.
Note:
The default password is
0000
.
Advertising