Epson PowerLite 2250U 5000-Lumen WUXGA 3LCD Projector - Manual (Page 175)

175
Setting Options Description
Standby Mode Communication On
Communication Off
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to
Always On )
• Communication from the
HDBaseT port (Control
Communications must be set
to On)
ECO Display On
Off
Displays a leaf icon in the bottom
left corner of the projected screen
to indicate the power-saving
status when the lamp brightness
changes
Note: The Power Consumption setting is disabled if you turn on the Multi-Projection setting in the
Extended menu.
Parent topic: Adjusting the Menu Settings